Reset maintenance light toyota camry 2012 push button start

How do you reset “Maintenance Light” Toyota Camry, reset Maintenance Light Toyota Camry on 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018. To reset maintenance light Toyota Camry and that can be made manually by use button on car dashboard.

To turning off Maintenance Light indicator light
Toyota Camry on 2007 2008 2009 2010 2011 2012 2013 2014 2015, conform to the following instructions:

• Turn the ignition to position On without starting the engine.(*)
• Press the odometer button until you see “TRIP A”
• Turn the ignition “off”
• Press and hold the Trip Odometer Reset button, and turn the ignition switch to the “On” position (*)
• Hold down the Trip Odometer Reset button until “000000” MILES appears on the display and the maintenance light turns off.

(*)=If your car has START push-button , press the “Start” twice without touching the brake pedal.

To turning off Maintenance Light indicator light 
Toyota Camry on 2002 2003 2004 2005 2006, conform to the following instructions:

• Turn the ignition to position On without starting the engine.(*)
• Press the odometer button until you see “ODO”
• Turn the ignition “off”
• Press and hold the Trip Odometer Reset button, and turn the ignition switch to the “On” position (*)
• Hold down the Trip Odometer Reset button until “000000” MILES appears on the display and the maintenance light turns off.

(*)=If your car has START push-button , press the “Start” twice without touching the brake pedal.

Toyota Camry reset maintenance Light indicator

This reset should be done after changed the engine oil and filter according to the technical specifications relating Toyota Camry Engine. Resetting without changing the engine oil lead to premature engine wear and serious problems in the functioning of these.

Post navigation

The Toyota Camry will display a ‘Maintenance Required‘ message to remind you that an oil change is due. Once maintenance service has been performed, you can reset the oil light with these steps.

2018-2021 Models

1. Select ⚙️ on the touch-screen, or select ⦿ on the steering wheel (depending on model).
2. Select 
   
   or “Vehicle Settings” (depending on model), then select “OK“.
3. Select “Scheduled Maintenance” then select “OK“.
4. Select “Yes” then select “OK“.

2007-2017 Models

1. Turn the ignition of the vehicle “On“. On push button models, press the Engine Start button two times.
2. Press the “Trip” or “Disp” button to toggle the display to show the Trip A mileage.
3. Turn the ignition to “Off“.
4. Press and hold the “Trip” or “Disp” button.
5. Continue to hold the “Trip” or “Disp” button while turning the ignition of the vehicle on. On push button models, press the Engine Start button two times. Do not start the engine.
6. When the odometer displays all zeros, it will confirm the maintenance light has been reset.

1998-2006 Models

1. With the vehicle running, press the “Trip” stem button to toggle the display to show the full odometer mileage.
2. Turn the ignition to the “ACC” or “Lock” position.
3. Press and hold the “Trip” stem button while turning the ignition to the “On” position.
4. Continue holding the “Trip” stem button until the display shows all zeros.

The light will display again after 5,000 miles.

I hope this post has helped you reset the oil maintenance light on your Toyota Camry.