How to reset oil change light on 2022 nissan altima

Reset oil service light Nissan Altima Hybrid. From years: 2007, 2008, 2009, 2010, 2011, 2012.

How do you reset oil service light Nissan Altima Hybrid. From years: 2007, 2008, 2009, 2010, 2011, 2012.

The maintenance mode for Nissan Altima Hybrid allows you to set alerts for the reminding of maintenance intervals for the following:

1. Turn the ignition to run, one position before starting engine/push START/STOP button once.
2. Press the (square) button, located on the instrument panel just behind the steering wheel to the left, to display the SETTINGS mode.
3. In the setting mode screen press (circle) button to move to MAINTENANCE.
4. Set a desired interval by pushing (circle) button to highlight ENGINE OIL and pressing (square) button.
5. The reset mode will open up and allow you to enter the desired distance.
6. Select RESET and select new time or distance.
7. Repeat step 3 for ENGINE OIL FILTER.
8. Turn the ignition off and then start the engine to verify the indicator has been reset.

All information how to reset oil service light Nissan Altima Hybrid is taken owners manual.

That it is the full procedure how to reset oil service light Nissan Altima  Hybrid. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Nissan cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders when by yourself.

 This is an information site where you can solve your car problems. Send us a comment if our procedures are correctly. If you would have anything to add, for us every opinion counts.

Click hear to see full procedure how do you reset the oil light indicator. How to reset the maintenance light and how do you reset service light for all Nissan vehicles.

Reset oil service light Nissan Altima. From years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012.

How to reset oil service light Nissan Altima. From years: 2005, 2006.

You can set the engine oil and the tire rotation interval.

To display the setting of the maintenance interval, select the “Engine Oil” or “Tire Rotation” key using the joystick and push the “ENTER” button.

1. Turn the ignition to run, one position before starting engine.
2. To set the maintenance interval, select the “Maintenance Schedule” key by using the joystick and push the joystick to right or left.
3. To reset the maintenance interval, select the “Reset” key using the joystick and push the “ENTER” button.
4. To display the MAINTENANCE INFORMATION automatically when set trip distance is reached, select the “Display Maintenance  otification” key and push the “ENTER” button.

The “MAINTENANCE NOTICE” screen (“ENGINE OIL” and “TIRE ROTATION”) will be automatically displayed as shown when both of the following conditions are met:

• the vehicle is driven the set distance and the ignition key is turned OFF.
• the ignition key is turned ON the next time the vehicle will be driving.

To return to the previous display after the “MAINTENANCE NOTICE” screen is displayed, press the PREV button.

The “MAINTENANCE NOTICE” screen displays each time the key is turned ON until one of the following conditions are met:

• RESET” is selected.
• Display Maintenance and Notification” is set OFF.
• the maintenance interval is set again.

HOW TO USE THE “TRIP” BUTTON Nissan Altima.

When the “TRIP” button is pushed, the following modes will display on the screen.

Warning message (if there are any) ! TRIP 1 (Elapsed Time, Driving Distance, Average Speed) ! TRIP 2 ! FUEL ECONOMY (Average Fuel Economy, Distance to Empty) ! MAINTENANCE (Engine Oil, Tire Rotation) ! OFF.

Trip 1, trip 2 and fuel economy items Nissan Altima.
To reset the TRIP 1, TRIP 2 and FUEL ECONOMY, select the “RESET” key using the joystick and push the “ENTER” button or push the “TRIP” button for more than approximately 1.5 seconds.

The full procedure how to reset oil service light Nissan Altima is taken owners manual.

How do you reset oil service light Nissan Altima. From years: 2007, 2008, 2009, 2010, 2011, 2012.

The maintenance mode for Nissan Altima allows you to set alerts for the reminding of maintenance intervals for the following:

1. Turn the ignition to run, one position before starting engine/push START/STOP button once.
2. Press the (square) button, located on the instrument panel just behind the steering wheel to the left, to display the SETTINGS mode.
3. In the setting mode screen press (circle) button to move to MAINTENANCE.
4. Set a desired interval by pushing (circle) button to highlight ENGINE OIL and pressing (square) button.
5. The reset mode will open up and allow you to enter the desired distance.
6. Select RESET and select new time or distance.
7. Repeat step 3 for ENGINE OIL FILTER.
8. Turn the ignition off and then start the engine to verify the indicator has been reset.

All information how to reset oil service light Nissan Altima is taken owners manual.

That it is the full procedure how to reset oil service light Nissan Altima. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Nissan cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders when by yourself.

 This is an information site where you can solve your car problems. Send us a comment if our procedures are correctly. If you would have anything to add, for us every opinion counts.

Click hear to see full procedure how do you reset the oil light indicator. How to reset the maintenance light and how do you reset service light for all Nissan vehicles.