Whole house water filter mounting bracket

4 out of 5 stars

Table of Contents Show

Wall-Mountable Triple Filter Bracket for Home RO Systems and Water Filters - For Three 10" Standard or 20" Standard Filter Housings*
Applications
Wall-Mountable Double Filter Bracket for Home RO Systems and Water Filters - For Two 10" Standard or 20" Standard Filter Housings*
Applications
Can I mount a water filter vertically?
Where should a whole house water filter be installed?
Is a whole house water filter a good idea?
How long does it take to install a whole house water filter?

by Feb 17, 2021

Holds my water filter, but good luck figuring out if it works with yours

Bracket did what it needed to do -- secured my water filter to the wall. Could be a little bit sturdier, in my opinion and benefit from some cross-members, but it gets the job done. However, the listing lacked key details about the dimensions and hole-spacing of the bracket. I ordered this bracket because the photo showed diagonal slots on the water filter side, suggesting that it was adaptable to many different water filter housings. I figured it was worth the risk. In Internet sales, there is no more mortal a sin than having the a photo that does not match the product, and that is what happened here. The product I received contained no slots. For the record, it had a fixed hole pattern of 2-1/4" x 2-1/4" center-to-center on the water-filter side. Luckily, this is exactly what I needed. The item photo should be updated, and a simple mechanical diagram should be included that shows the bracket dimensions and hole spacing.Read full review

Verified purchase: Yes | Condition: New

In Stock for Immediate Shipment.

$14.89

More Information

Brand	APPLIED MEMBRANES INC.

Wall-Mountable Triple Filter Bracket for Home RO Systems and Water Filters - For Three 10" Standard or 20" Standard Filter Housings*

Constructed of sturdy steel with a corrosion proof powder coating, this bracket is designed to mount 3 filter housings as part of a 4-Stage or 5-Stage RO System Undersink RO System, or as standalone water filters. This triple-filter-housing bracket is lip-down style (z-shape) for filter housings to be connected connected side-to-side**. The mounting bracket has universal pre-drilled holes for wall anchorings, and as well as holes for screws to mount the top of the filter housings and mounting clips, as well as openings for pressure relief buttons.

*Note: Multi-Housing brackets can only accomodate filter housings with in/out port sizes up to 1/2". Wide-style housings with 3/4" in/out connections must be mounted individually using single brackets.

**Note: If front-to-back plumbing is required, a lip-up style bracket is needed.

Filter Bracket Specifications


AMI Part Number:	H-B2030W
Number of Filter Housings:	Three (3) x 10" or 20" Standard Filter Housings (up to 1/2" in/out*)
Shape:	"Z-Shaped" - Lip Down for Side-to-side direct plumbing configuration
Recommended Mounting Screws:	#10 3/4" or #10 1/2" Phillips Screws (Not included.)
Finish:	White Powder Coat

Applications

Point of Use (POU) Drinking Water Systems
Home RO Systems
Whole House Water Filters
Point of Entry (POE) Water Filtration Systems
Prefilters or Post Filters for Wall-Mount RO Systems
Office
Institutions
Lab

In Stock for Immediate Shipment.

$11.58

More Information

Brand	APPLIED MEMBRANES INC.

Wall-Mountable Double Filter Bracket for Home RO Systems and Water Filters - For Two 10" Standard or 20" Standard Filter Housings*

Constructed of sturdy steel with a corrosion proof powder coating, these brackets are designed to mount filter housings as part of a 3-Stage or 4-Stage RO System Undersink RO System, or as standalone water filters. This double-filter-housing bracket is lip-up style (u-shape) style to accommodate front-and-back plumbing connections.** The mounting bracket has universal pre-drilled holes for wall anchorings, and as well as holes for screws to mount the top of the filter housings and mounting clips, as well as openings for pressure relief buttons.

Filter Bracket Specifications


AMI Part Number:	H-B2021W
Number of Filter Housings:	Two 10" or 20" Standard Filter Housings (up to 1/2" in/out*)
Shape:	"U-Shaped" - Lip Up
Recommended Mounting Screws:	#10 3/4" or #10 1/2" Phillips Screws (Not included.)
Finish:	White Powder Coat

Applications

Point of Use (POU) Drinking Water Systems
Home RO Systems
Whole House Water Filters
Point of Entry (POE) Water Filtration Systems
Prefilters or Post Filters for Wall-Mount RO Systems
Office
Institutions
Lab

Can I mount a water filter vertically?

The filter can be mounted in any direction, including sideways or upside down. Keep in mind, however, that cartridge changes for upside-down or sideways mounted filters can be messy and clumsy.

Where should a whole house water filter be installed?

Usually, the best place for a whole house water filter is near your main water shut-off valve, which is usually located in a basement or on the perimeter of the house in a utility closet or other such area if you don't have a basement.

Is a whole house water filter a good idea?

Whole house filters are a big investment for your home and work effectively to protect your fixtures and home appliances. Enjoy better health and peace of mind knowing harmful contaminants have been removed from every faucet outlet in your entire home.

How long does it take to install a whole house water filter?

Installing a whole house filter system could take an experienced plumber two to four hours. If you're installing it yourself, then it may take a little longer depending on your level of experience.