Briggs and stratton snow blower belt replacement

Africa, Asia, Barbados, Bermuda, Canada, Central America and Caribbean, Europe, French Guiana, French Polynesia, Greenland, Guadeloupe, Libya, Martinique, Mexico, Middle East, New Caledonia, Oceania, Reunion, Russian Federation, Saint Pierre and Miquelon, South America, Southeast Asia, Ukraine, Venezuela

1. Turn off the engine, remove the spark plug wire, and

wait for all moving parts to stop. Rotate the spout full

right. Loosen the two screws (B, Figure 27) securing

the belt cover.

2. Tilt the cover forward and work it off the snowthrower.

3. Move the belt guides (B, Figure 28) by loosening the

two capscrews (A).

4. Remove the auger drive belt as follows:

a. Slip the auger drive belt (D, Figure 28) from the

idler pulley by pushing it away from the pulley and

then toward the rear.

b. Remove the belt from the engine pulley. Slip the

belt from under the brake pad.

c. Remove two capscrews from bottom cover to

snowthrower frame. Loosen nuts (A, Figure 29) on

each side to release auger pulley belt stops (B).

Move belt stops and remove belt from pulley (C).

d. Remove the two bolts (D, Figure 29) from the gear

assembly.

e. Loosen the set collar and slide the axle shaft right.

f. Belt can be removed from top or bottom. For more

clearance to remove the belt, engage the traction

drive lever.

5. Remove the traction drive belt as follows:

a. Pull the idler pulley (I, Figure 28) away from the

belt and slip the belt from the pulley.

b. Slip the belt off the traction pulley and then the

engine pulley. The arm for the front idler pulley (G,

Figure 28) may have to be pivoted to provide clear-

ance for removing the belt from the traction pulley.

c. Pull the belt out between the auger pulley (F,

Figure 28) and traction pulley.

Adjustments & Service

A

Figure 27. Belt Cover

A. Belt Cover

B. Screws

A

B

I

Figure 28. Belts and Pulleys

A. Capscrews

B. Belt Guides

C. Traction Drive Belt

D. Auger Drive Belt

E. Engine Pulley

F. Auger Pulley

G. Idler Pulley, Auger

H. Traction Pulley

I. Idler Pulley, Traction

29

B

A

C

H

G

B

D

E

F

Keep it Running - Keep it Genuine. Help keep your outdoor power equipment running at peak performance by ordering Briggs & Stratton replacement and maintenance parts. You can find the right part you need including carburetors, air filters, spark plugs, tune-up kits and other engine repair parts. Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines. Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations.

• Auger drive belt for Murray equipment
• Dimensions: 35" L x 1/4" W x 1/2" H
• Designed to exact OEM standards, manufactured and tested to help deliver optimum performancet

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Top reviews from the United States

There was a problem filtering reviews right now. Please try again later.

Reviewed in the United States on January 23, 2022

Perfect replacement belt for a worn belt on a simplicity ss822ex snow blower. Easy to install and fit well.

Reviewed in the United States on February 18, 2022

Fit great on my model snowblower

Reviewed in the United States on February 20, 2022

Arrived promptly. Fit correctly.

Reviewed in the United States on March 31, 2021

Belt for snow-blower, exact part number and therefore, it fits! If you own a Briggs & Stratton Snow-Blower, keep a spare on hand. Installation is easy if you know how, remove cover, loosen blade pully (left hand thread!), slip belt over pulleys. Spin blade pulley back down ( no wrench needed), replace cover. 10 minutes to do.

Reviewed in the United States on February 21, 2021

fits Briggs & Stratton 7522E snowblower, no problem. Appears to be an exact replacement -- the original was made in Mexico too. Snowblower works like new!

Reviewed in the United States on July 11, 2021

Fit perfectly at a great price

Reviewed in the United States on January 21, 2020

Ordered this single-stage snowblower belt for my Simplicity, when the OEM belt failed. It's a perfect fit and had it delivered within two-days, just before the next big snowstorm. Great timing and awesome job with the entire transaction. Will definitely order another one f/ spare.

Reviewed in the United States on March 13, 2021

Very good Belt, it fit on my snow blower Briggs and Stratton922DX

How often should you change snowblower belts?