How to set a quartz alarm clock

Document

ANALOG QUARTZ
ALARM CLOCK

Model: 25655
DC:010622

POWER UP

  1. Insert 1 fresh AA battery into your clock according to the polarity markings.
  2. Turn the Time Set Knob counterclockwise to set your time.

TIME ALARM

  1. Turn the Alarm Set Knob counterclockwise to set the alarm time.
  2. Move the Alarm ON/OFF switch to ON to activate your alarm. Move the Alarm ON/OFF switch to OFF to deactivate your alarm.

When the alarm sounds it will increase in volume and frequency for 30 seconds and remain at that volume until the alarm is snoozed or turned off.

SNOOZE AND LIGHT

  • Four-minute snooze: When the alarm sounds, press the button on top of the clock. Snooze may be repeated.
  •  Light: Press the button on top of the clock.

POSITION

  • Place your clock on your nightstand, desk, or countertop.

SPECIFICATIONS

Battery Requirements: 1 AA (IEC LR6) required in movement (Alkaline recommended) (not included)
Battery life: over 12 months

CARE AND MAINTENANCE

Battery replacement instruction:
When batteries of different brands or types are used together, or new and old batteries are used together, some batteries may be over-discharged due to a difference in voltage or capacity. This can result in venting, leakage, and rupture and may cause personal injury.

  • Always purchase the correct size and grade of battery most suitable for the intended use.
  • Always replace the whole set of batteries at one time, taking care not to mix old and new ones or batteries of different types.
  • Clean the battery contacts and those of the device prior to battery installation.
  • Ensure the batteries are installed correctly with regard to polarity (+ and -).
  • Remove batteries from the product during periods of non-use. Battery leakage can cause corrosion and damage to this product.
  • Remove used batteries promptly.
  • For recycling and disposal of batteries, and to protect the environment please check the internet or your local phone directory for local recycling centers and/ or follow local government regulations.

WARRANTY & SUPPORT

Equity provides a 2-year limited warranty on this product from the date of consumer purchase against defects for material and workmanship. During this period such defects will be repaired, or the product will be replaced at Equity’s option, without charge. This warranty does not cover damage caused by misuse or negligence.

ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OR FITNESS AND MERCHANTABILITY, ARE LIMITED IN DURATION TO A PERIOD ENDING TWO YEARS FROM THE DATE OF PURCHASE.

Some states do not allow limitations on how long an implied warranty lasts so the above limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from State to State.

If your product is not working properly, please send:
Your product
A letter explaining the problem and $5.00 for postage and handling to:
Equity by La Crosse
Warranty Department
2830 26th St S.
La Crosse, WI 54601

For more information and support visit: www.lacrossetechnology.com/support

CA WARNING: This product can expose you to chemicals including acrylonitrile, butadiene, and styrene, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov

Made in China – Printed in China

Documents / Resources

References

  • P65Warnings.ca.gov

Post navigation

How do you set a quartz clock?

You can use the hand set or you can manually move the hour hand (shorter hand) forward in a clockwise direction. DO NOT move the hour hand backwards (counter clockwise). Moving the hour hand backwards or moving the minute hand can strip the gears resulting in the movement having to be replaced.

How do you set an alarm on a quartz alarm?

ALARM SETTING.
Slide the Alarm Switch to the OFF position..
Make sure the Set Knob is pushed in..
Turn the Set Knob until the alarm hand is set to the. desired alarm time..
Slide the Alarm Switch to the ON position..

How do you set an alarm clock?

Follow these steps to set an alarm using Android's default app..
Open the Clock app..
Tap Alarm in the bottom left corner. 2 Images. Close..
Tap the + button near the bottom..
Select the desired alarm time, then press OK. 2 Images. Close..

Toplist

Latest post

TAGs