How to calculate square footage?
It's easy. Follow these steps.
Measure the length in feet, Measure the width in feet. Multiply the length figure by the width figure. This will be your total square footage for that portion of your project. Continue to repeat this for all parts of the space that will get the same tile. Add these together for your total square footage.
Measuring in
inches works as well. Do the math the same way, then divide by 144 to get your total in square feet.
When calculating square footage account for the entire space (i.e. under vanity/cabinets).
How much to allow for waste?
To allow for waste, you must consider the installation. For most standard installations, 10% extra for waste is sufficient. Percentage of waste for more elaborate patterns like running tile on a 45 degree angle, herringbone or cross hatch, consult with your installer. Add 15% for tile being installed in a room with lots of jogs and corners. These installations will require more cuts and thus more waste.
Length x Width + Waste = Amount Needed
How to measure for bullnose?
Measure the length of any outside edge where your tile edge would be exposed or you want framed out. Bullnose (also called trim pieces and decorative tiles) are typically sold by the piece. To figure the quantity you have to establish the length of the trim piece (i.e. 6" bullnose, 8" decorative liner), then the rule is: Your total linear length divided by the length of each piece equals your quantity needed.
How to calculate how many pieces of bullnose you will need?
If you have ten feet exposed edge that needs bullnose this is equal to 120". If you selected a 6" bullnose or trim piece, you will need to divide 120" by 6", which will give you 20 pieces of bullnose needed. Using 8" decorative liner for the same 120", you divide 120" by 8" which would be 15 pieces of liner needed.
Measuring for Schluter Profile Edging
Measure the length of any outside edge where your tile edge would be exposed. Not all edging is the same. Speak to your design associate about different uses.
How did you get 104 ft?
Your two side walls are 3' by 7.5', or 22-1/2sqft each, or 45sqft for the two.
Your rear wall (rounded up) is 5' by 7.5', or 37-1/2sqft.
Add the three together and as has been mentioned, you have 82-1/2sqft.
To nitpick by using the 58" dimension, your rear wall is actually 36-1/4 sqft. So your real total is 81-1/4 sqft.
You can do this with minimal waste due to the size of your tile and the dimensions of your shower.
For simplicity's sake, let's assume you want a horizontal stacked pattern.
Your side walls are 36" long by 90" tall. With your 19.75" by 10" tiles being set horizontally, your side walls will be two tiles wide by 9 tiles tall, for a total of 18 tiles per side wall.
Your back wall is 58" wide by 90" tall. Roughly 3 tiles wide by 9 tiles tall.
18 + 18 + 27 = 63 tiles, or 86.4 square feet of tile to cover a little over 80 sqft of wall. Not bad.
When done, you'll have about 5 sqft, or roughly 4 tiles worth of offcuts. A little over 6% of waste. If you go with a running bond, use your offcuts to wrap through the corners and you can be just as efficient.
Answer
For a tub-shower combination, the usual proportions are 60 inches in length, 32 inches wide and 8 feet in height. Tile – Your choice of tile has the most impact on the overall appearance of the shower. 90-95 square feet of wall tile and 15-20 square feet of shower floor tile are required for this project.
Another thing to consider is how many square feet a conventional tub surround is.
The typical bath surround will have a surface area of around 1,920 square feet. This number will vary based on the size of your bathtub and the amount of space you have available in your bathroom, in most instances.
What is the normal size of a shower?
Dimensions and clearances for the shower Sizes of Standard Showers: The smallest showers available are measured in square inches and are 32 × 32 inches (81 x 81 cm). If you can accommodate a rectangle shower 36 inches by 48 inches or bigger in your bathroom, you’ll be more comfortable – and your elbows will thank you – while washing your clothes straight up.
Another thing I’d want to know is how many square feet of tile I’ll need for a shower.
Multiply the total square footage by the number of tiles required per square foot to arrive at the following result: One 12-by-12-inch tile or four 6-by-6-inch tiles are required to cover one square foot. In order to cover a 50-square-foot space with 12-by-12-inch tiles, you would need 50 tiles, but you would need 200 tiles — four times the number of 50 tiles — if you used 6-by-6-inch tiles.
What is the proper way to measure for a tub tile surround?
With the tape measure, measure the distance between the base of the wall and the top of the tub. With a pencil and paper, make a note of the length in inches of this number.
Take the height of the wall at the highest point on one of the four corners.
Multiply the length by the width of the wall to get the height of the wall.
Take the time to measure the size of the tiles you want to use.
Each of the tub surround’s walls should be measured.
There were 38 related questions and answers found.
What is the finest material to use for a tub surround?
A variety of man-made plastic composites are used to construct bathtub surrounds. They are available in both cast and compression moulded forms. An excellent example of a solid surface surround is the Swanstone material. Solid surface also includes engineered stones, which are marble, granite, or quartz pieces that have been combined with a resin to create a cohesive surface (glue).
What is the finest material to use for the walls of shower enclosures?
What is the finest material to use for the walls of shower enclosures?
Tile made of glass. They are exactly what they sound like: they are transparent tiles that add a gleam to your bathroom’s decor by reflecting light. Tile made of stone. Stone tile is a kind of tiling that has the appearance of natural marbling. Ceramic. Acrylic.
In order to build a normal tub surround, how much tile do I need?
I’m trying to figure out how many square feet an average bathtub surround (the walls that surround an average sized bathtub) is. Because the bathtub is 5 feet long and 3 feet broad, you will need (3+5+3)*7=77 square feet of tile cladding.
How can I figure out how many square feet of wall tile I’ll need?
The square footage of the project area may be calculated by multiplying the length by the breadth of the project area. For example, if the room is 10 feet wide by 12 feet long, multiply 10 by 12 to get the square footage. This particular room has a total square footage of 120 square feet. Calculate the quantity of tile you’ll need by converting the square footage.
What is the approximate cost of installing a tub surround?
Installing a Bathtub Surround will cost you money. Specifications of the item Quantity is limited and has been unused. Two-hour minimum labour charge that may be applied to other duties is known as the Minimum Labor Balance. Installation of bathtub surround will take around 0.0 h and cost $0 in total. 1 EA $807 Average Cost per Surround $806.57 1 EA $807 Average Cost per Surround
What is a bathroom surround, and how does it work?
Your bathtub surround is the ideal method to carry the elegance and sophistication of your Luxury Bath tub all the way up the walls and into the wet area of your bathroom. In this way, you may be certain that throughout the whole life of your new Luxury Bath tub surrounds, they will never warp, break, droop, or detach from the wall—a guarantee!
How can I figure out how much tile I’ll require?
To calculate the overall cost of tiling a room, add the total cost of installation supplies to the total cost of the tile and double the whole cost by the applicable local sales tax. Subtract the total cost of tiling the room from the total square footage of the room to get the price per square foot that it will cost to tile your floor in the room.
What is the square footage of a 12×24 tile?
24 in. by 24 in. Glazed Porcelain Floor and Wall Tile (15.6 square feet per case)
What is the square footage of a 20×20 room?
400
What is the approximate amount of tile required for a conventional shower?
90-95 square feet of wall tile and 15-20 square feet of shower floor tile are required for this project. Typically, a bullnose tile or a Schluter strip is utilised to finish off the edges of the countertop. Twenty linear feet will be sufficient to account for the height of the wall tile.
What is the square footage of a 3×6 tile?
8 tiles equals 1 square foot. Metal tiles that are easy to apply using a peel and stick method. This satin White surface has a subtle sheen to it and gives the appearance of a traditional white subway tile, which blends in wonderfully with any décor scheme of your choice. (This package contains eight 3″x 6″ tiles, or one square foot.)
How many tiles do I need to cover a square foot of floor space
Because the tiles are 4 inches on each side and there are 12 inches in a foot, it takes three tiles to equal one foot in length, and three times three tiles equals nine tiles to equal a square foot. To cover 45 square feet, you’ll need 9 45 = 405 tiles, which is equal to 945.
What is the square footage of a 10×10 room?
100 square feet is a lot of space.