Hello :) Is it the motor that is making a distorted noise? If so, maybe some dust has made its way in. I'm from the UK and we don't have these bissell cleaners, but from a point of view of someone who has actually watched scientific reviews of cleaners like this I 'know' they're pretty bad. This isn't your fault though and I forgive you :)
I see the plastic that's coming off. It looks to be part of something to lift the brushroll off the ground when idle? You looked it up anyway so I think it might be that as well.
I've seen a series of videos on YouTube of someone who has this series of cleaner but it's not the turbo version and it's in blue, and the motor is very amplified. It started when they were attempting to do a full house clean with it. IS this the sort of sound you're talking about?
I'd really love to help but I'm not someone who strips down vacuums or anything so I'm really sorry, anyhow I'm still quite interested :)
M
aintenance and care
Clean and replace
rotating floor brush
You should check your cleaner's rotating
floor brush and drive belt regularly for wear
or damage. You should also clean the brush
and brush ends by removing string, hair and
carpet fibers. These can wrap around the
brush and hamper its ability to effectively
clean your carpet. Also, remove any debris
that has accumulated under the brush cover.
1. Turn off vacuum and unplug from
electrical outlet.
2. Place vacuum upside down with
brush roll facing upwards.
3. Remove five screws as shown with
a small Phillips screwdriver.
4
Lift off brush cover.
5. Grasp floor brush at both ends and
lift out.
6. Clean strings, hair and other debris from
floor brush, motor pulley, and drive belt.
7. Check floor brush for worn areas and
replace if needed.
8. Check air passageway for obstructions.
Remove debris from this area.
9. When finished cleaning, reposition floor
brush and drive belt. Then replace the
brush cover and five screws.
10. Turn floor brush by hand several times
in the direction of the motor pulley. If
properly installed, drive belt will align
itself on floor brush.
w w w . b i s s e l l . c o m
3.
Five Screws
5.
9.
8 0 0 . 2 3 7 . 7 6 9 1
4.
Motor Pulley
8.
Air Passageway
11
EZ SAVINGS : Extra 10% OFF on Bags, Belts & Filters on Orders over $45. Use Coupon SAVE10 excludes vacuums, motors, Dyson, Shark, Cirrus
How to install a roller lifter
asked by Lisa on October 2, 2022
Answer here
Sign up or Log in to answer this question or post comments.
Here is a YouTube tutorial //youtu.be/Aetwk9RW9hU
G G answered on October 9, 2021
My spring popped off of my 2690.
How do I put it back on?
Dorinda Wheeler answered on June 1, 2021
Here is a YouTube tutorial //youtu.be/Aetwk9RW9hU
G G said on October 2, 2022
- About EZ Vacuum
- Purchase Orders
- Shipping & Returns
- EZvacuum Discount Coupons
- Privacy Policy
- Job Openings - We are Hiring!
- Site Map
- Answers from EZvacs
- Orders and Returns
- Contact
Cheaper than Your Local Store plus *Free US Ground Shipping.
Disclaimer: EZvacuum is not an authorized Miele Dealer.
EZvacuum is not an authorized SEBO Dealer. We are in no way affiliated with, representing, associated, or sponsored by Miele, SEBO, Hoover, Panasonic, Bissell, Bosch, Aerus, Shop-Vac any other manufacturer name brands or their copyrighted product unless otherwise mentioned on the brand page. All brand names, trademarks and logos are the property of their respective trademark and copyright owners. By continuing to enter this Site, you are expressly and impliedly agreeing to all terms in the
disclaimer.