TRD Wheels Alert!Upgrade your ride with the NEW Geniune TRD Bronze Wheel.
Turn Signal Light Bulb (Front)
Part Number: 9008498048
Supersession(s): 90084-98048
Fits Avalon, Corolla, Matrix
Exterior Bulb - Repair or Replace
How many technicians does it take to replace a light bulb? Bring us your 2004
Toyota and find out.
94 people have looked at this part recently
MSRP
All prices are Manufacturer’s Suggested Retail Prices and do not include any applicable tax and/or installation charges. Dealer sets actual price.
Additional dealer discounts may apply.
Click to see warranty information.
Please select a dealer to view local pricing.
Enter VIN
Enter 17 digit VIN here
Toyota 4Runner Turn Signal & Fog Light Bulb Replacement Guide
How to replace a burnt out front turn signal and fog light bulb in the front bumper of a 2003 to 2009 Toyota 4Runner.
Turn Signal & Fog Light
Fog (Red) - Turn Signal (Grey)
1/4 Turn Counter Clockwise
This automotive "how-to" guide was specifically written to assist owners of the 4th generation (2003, 2004, 2005, 2006, 2007, 2008 & 2009) Toyota 4Runner SUV in replacing a burnt out front turn signal or fog light bulb in the lower part of the front bumper.
Owners of other related Toyota or Lexus vehicles such as the Hilux, Tacoma, Land Cruiser, T100, SW4, FJ Cruiser, Fortuner and Lexus GX may also find these DIY instructions to be helpful.
Replacement bulbs from Sylvania and other manufacturers including their part numbers are as follows: Front Turn Signal (2003-2005) 7440A or 4157NA (with DRL) / 2006-2009 # 1156A and Fog Light bulb # 9006.
(Please verify the part numbers of your old bulbs before purchasing new bulbs.)
No tools are needed to replace the front turn signal or fog light bulbs.
Release Power Connector
Fog Light Power Plug
1/4 Turn Clockwise To access either the fog light bulb or front turn signal bulb, just slide under the middle of the front bumper.
The fog light bulb has a red / orange socket that is closer to the center line of the vehicle.
The front turn signal bulb has a light grey socket that is closer to the outer edge of the vehicle.
To remove the fog light bulb, rotate the base of the bulb 1/4 turn counter clockwise and pull it straight out.
Separate the power connector from the base of the bulb by pushing down on the release tab.
Push the power connector on to the base of a new # 9006fog light bulb. Avoid touching the glass part of the new halogen bulb with your fingers. If you get the bulb dirty, wipe it off with an alcohol moistened paper towel.
Insert the new fog light bulb into the front bumper and rotate it 1/4 turn clockwise to secure it in place.
Turn Signal Bulb Socket
1/4 Turn Counter Clockwise
# 7440A 992 Amber Bulb To remove the turn signal light bulb, rotate the light grey base 1/4 turn counter clockwise and pull it straight out of the bumper.
Pull the old # 7440A(or # 4157NAfor 4Runner SUVs with DRL) amber colored bulb straight out of the socket and push in a new one.
(The 2006 to 2009 model years use a 1156Aturn signal light bulb.)
Push In New Bulb
1/4 Turn Clockwise
Testing Fog & Turn Signal Insert the new turn signal bulb into the front bumper and rotate the socket 1/4 turn clockwise to lock it in place.
Test the new fog light and/or turn signal bulb by turning on the headlights, the fog lights, and activating the hazard signals.
For more, check out my
Toyota 4Runner Repair & Maintenance Guides page.