This item ships free to the continental US
Low stock
Order now and this part ships in
Select Matching Wheels & Tires
FREE Mount, Balance & Shipping
Overview
Who says your daily driver and your weekend warrior can't be the same vehicle? The 4-inch N3-Series Kit for Jeep ZJ was engineered by Rough Country's Research and Development Team to give the perfect blend of off-road performance and smooth highway ride. A set of application tuned, lifted coil springs are included in this kit along with a set of tubular upper and lower control arms outfitted with rubber Clevite bushings for the best in vibration dampening. The 4-inch N3-Series kit also includes a track bar bracket and a set of extended sway bar links.
Improve your on and off-road ride quality with Rough Country's premium N3 shocks! These 10-stage variable valving, high-pressure Nitrogen charged shocks offer a fantastic blend of off-road action and smooth highway ride quality. With a durable 18mm spring-loaded piston rod and faster-cooling 54mm shock body, this shock offers up to 36kN Tensile Strength for a long lifespan of impressive vibration dampening. Features natural rubber bushings and an eye-catching metallic silver paint.
Features
- Easy bolt-on installation
- Increased ground clearance
- Levels the front with the rear of the vehicle
- Includes application valved N3 series shock absorbers which offer the best in balanced performance for on and off-road use.
Notes - Important
- Does NOT fit AWD models.
- Models equipped with a CV style front driveshaft may result in driveshaft vibration. If this occurs, replacing the driveshaft, axle yoke and / or transfer case yoke will need to be performed to rid the vehicle of driveline vibration.
Specs
More Information
900.20 |
4-6 hours |
In the Box
Front
- Lifted coil springs
- Fixed lower control arms
- Extended sway-bar links
- Bumpstop extensions
- Hardware
Rear
- Lifted coil springs
- Fixed upper control arms
- Fixed lower control arms
- Sway-bar brackets
- Bumpstop brackets
- Brake line brackets
- Track bar bracket
- Hardware
Shocks
- (4) Premium N3 Series
Instructions
- Est. Install Time: 4-6 hours
- View Instruction Sheet
Vehicle Fitment
1993-1998 | 4WD | Jeep | Grand Cherokee |
ALWAYS read all product page details for more important fitment information
Recommended Tires & Wheels
31x10.50R18 | Factory 18 | 5x4.5 | - | - |
31x10.50R17 | Factory 17 | 5x4.5 | - | - |
31x10.50R16 | Factory 16 | 5x4.5 | - | - |
31x10.50R15 | Factory 15 | 5x4.5 | - | - |
Due to differences in manufacturing, dimension and inflated measurements, tire and wheel combinations should be test fit prior to installation
Reviews
Questions/Answers
Want the perfect combination of looks, off road performance and on road handling? This 4" Suspension Lift lets you clear 32" tires and have the ground clearance and wheel travel you want when you venture off road. Fits 4 4WD 1993 - 1998 Jeep Grand Cherokee (ZJ). text { font-size: 4.0vw; }
@media (min-width: 1024px) { text { font-size: 3.25vw; } }
@media (min-width: 1600px) { text { font-size: 2.75vw; } } CONFIGURE YOUR KIT4” Coil Spring Lift Kit
1993 - 1998 Jeep Grand Cherokee (ZJ) - Gas / 4WD
From $563.15
Quick Specs
5.5 hrs
Installation Time
Overview
Front Lift Height | 4" |
Rear Lift Height | 4" |
Front Lift Method | Coil Springs |
Rear Lift Method | Coil Springs |
Lift Type | Lift Kit |
Wheel Size | 15 x 8 |
Back Spacing | 4" |
Max Tire Size | 31 x 10.5 |
Wheel Size 2 | 15 x 8 |
Back Spacing 2 | 4.5" |
Max Tire Size 2 | 32 x 11.5 |
Wheel Size 3 | 16 x 8 |
Back Spacing 3 | 4.5" |
Max Tire Size 3 | 32 x 11.5 |
Is Adjustable | No |
Metal Cutting Required | No |
Accommodates Factory Wheels | Yes |
Welding Required | No |
Features
- Bump stop extensions properly limit up-travel, protecting your vehicle.
- Full length replacement coil springs add additional ride height while maintaining ride quality.
- Heavy-duty lower control arms improve strength and articulation while correcting caster.
- Heavy-duty, extended-length sway bar links improve operating angle for reduced body roll.
- Rear track bar bracket correctly positions rear axle under vehicle.
- Transfer case drop kit included to correct rear driveline angle and allow use of factory rear driveshaft.
All In The Details
- CV Front Driveshaft? ZJs were manufactured with different types of driveshafts. If your vehicle is equipped with factory a CV style front driveshaft, an aftermarket U-joint style driveshaft will be required to eliminate driveline vibration. For help understanding this problem and to help find a solution, please contact customer support.
- Fitment: V8 engine equipped models may not achieve stated lift height. If equipped with V8 or other heavy aftermarket accessories such as a winch bumper 3/4" front coil spacers are recommended to achieve additional front ride height. Add in configuration / checkout.
Specifications
Install Time Hours | 5.5 hrs |
Difficulty Level | 3 out of 5 Moderate Automotive mechanical experience recommended, some specialty tools required, adjustment may be necessary, minor cutting. |
- 1993 Jeep Grand Cherokee ZJ 4WD
- 1994 Jeep Grand Cherokee ZJ 4WD
- 1995 Jeep Grand Cherokee ZJ 4WD
- 1996 Jeep Grand Cherokee ZJ 4WD
- 1997 Jeep Grand Cherokee ZJ 4WD
- 1998 Jeep Grand Cherokee ZJ 4WD
From $563.15+ taxes
Configure KitJump To:VIEW SUMMARY
HIDE SUMMARY